Special basket centrifuges
KO / KT
Special basket centrifuges
Separate oil from water, or remove retained oil and water from parts. Choose the series by the material being processed and the recovery method.
Choose for the material to be processed
KO series
Continuous oil–water separation.
KT series
Deoiling and dewatering.
KO series · continuous oil–water separation
For liquid mixtures containing oil and water. Separated liquids are recovered through the upper and lower outlets. Feasibility depends on the actual mixture and operating conditions.
KO specifications
| Model | Basket diameter × depth (mm) | Catalog throughput (L/h) | Speed (rpm) | RCF (G) | Reference weight (kg) |
|---|---|---|---|---|---|
| KO-20 | 550×305 | 600 | 2,800 | 2,400 | 550 |
| Model | A (mm) | B (mm) | C (mm) |
|---|---|---|---|
| KO-20 | 840 | 1,560 | 990 |
600 L/h is a catalog value. Actual throughput depends on feed properties, mixing state and separation conditions. Catalog values are reference specifications. Dimensions, weight and operating conditions vary with the configuration. Refer to the drawing and specification for the actual machine when planning installation.
KT series · deoiling and dewatering
Load the product into a lift-out metal inner basket and fit it into the centrifuge. After spinning and confirming complete stop, lift the inner basket and remove the product through its bottom.
KT specifications
| Model | Basket diameter × depth (mm) | Basket volume (L) | Speed (rpm) | Reference weight (kg) |
|---|---|---|---|---|
| KT-15 | 381×230 | 12 | 1,000 | 360 |
| KT-20 | 508×270 | 25 | 900 | 580 |
| KT-24 | 610×270 | 34 | 800 | 670 |
| KT-30 | 762×350 | 70 | 750 | 950 |
| KT-36 | 914×350 | 95 | 700 | 1,400 |
| Model | A (mm) | B (mm) | C (mm) |
|---|---|---|---|
| KT-15 | 540 | 1,080 | 700 |
| KT-20 | 670 | 1,380 | 990 |
| KT-24 | 670 | 1,380 | 990 |
| KT-30 | 910 | 1,755 | 1,140 |
| KT-36 | 995 | 1,960 | 1,500 |
The reference catalog does not list RCF values for the KT range, so no RCF value is stated here. Loading must be checked by weight, shape and machine specification, not by volume alone. Catalog values are reference specifications. Dimensions, weight and operating conditions vary with the configuration. Refer to the drawing and specification for the actual machine when planning installation.
Information for model selection
For KO
Tell us the liquid types, oil / water ratio, temperature, mixing state and required throughput.
For KT
Tell us the product material, shape, dimensions, retained oil or water, and batch weight.