Basket Type Centrifugal Separator Bottom Discharge

The bottom discharge type discharges solids from the bottom of the centrifuge.
Since solids can be discharged using a scraping device, the process can be automated.
This type is suitable for mass production and labor saving in the production process.

Basket Type Centrifuge Separator Top Page

KDB Series (Centrifugal sedimentation type)

This model is a bottom discharge type that uses a non-porous basket to separate solids by using strong centrifugal force. The raw liquid is fed into the centrifugal separator and separated into liquid and solid in the basket, and the separated liquid is removed from the top of the basket by an overflow or skimming device.

Point

The solids remaining in the basket can be removed downward by a scraper at low speed by means of a deceleration device.

Specifications

KDB Series (Centrifugal sedimentation type) Specifications

BDC Series (Centrifugal filtration type)

This model allows solids, crystals, etc. to be easily dropped from the bottom of the basket after processing.
This type is very convenient when the volume of solids to be treated is large or when solids are removed frequently.

Point

The basket rotation is slowed down to a low speed (30-40 rpm) by the decelerator, and then the solids are scraped down to the bottom of the centrifugal separator by the scraping device.

Specifications

BDC Series (Centrifugal filtration type) Specifications

KFB/KFC Series (Centrifugal sedimentation type / Centrifugal filtration type)

Fully Automatic Bottom Discharge Type Centrifuge
Bottom discharge type equipped with automatic scraping device

Automatic scraping device
The bottom discharge type centrifugal separator is equipped with an automatic scraping device, automatic braking device, hydraulic or pneumatic unit, control panel, safety devices for automation, etc. All you have to do is press the start button to operate the centrifugal separator, and it will automatically repeat the cycle.

KFB/KFC Series (Centrifugal sedimentation type / Centrifugal filtration type)

Automatic scraping device

This device automatically scrapes off solids remaining in the basket from the bottom of the basket to the outside of the centrifugal separator.
It is mounted on the top of the casing cover, and the solids are scraped off by the operation of the scraping blade attached to the end of the shaft.

Automatic skimming device

This device automatically discharges the liquid portion on the surface layer inside the basket to the outside of the centrifugal separator.
This device improves work efficiency when the liquid portion is to be collected or when separating liquids with poor filtration properties.